Dedicated to Oxy-hydrogen Kit Machine

Dedicated to Oxy-hydrogen Kit machine SPECIFICATION The hydrogen generator consists of electrolysis cells, pure water tanks, hydrogen/water separators, collectors, dryers, sensors, pressure regulators, and switching power supplies. Only pure water can produce hydrogen. After the electricity is...
  • Dedicated to Oxy-hydrogen Kit machine

    SPECIFICATION

    Mode

    Specification

    GTHO-2500

    Input Voltage

    380 ±10%,50/60Hz,three phases

    Rated Capacity (KVA)

    9

    Working Gas Pressure (Mpa)

    ≤0.2

    Relative Humidity (%)

    90

    Rated Gas Production (L/h)

    2500 ±10%

    Water Consumption (L/h)

    1.6

    Maximum Cutting Thickness (mm)

    80

    Effective Punching Thickness (mm)

    40

    Water Feed

    auto

    Cooling Mode

    Air Cool

    The Insulation Level

    F

    Power Supply Protection Grade

    IP21S

    Flame Temperature (℃)

    Adjustable 800~3200

    Working Medium

    Filtered water or deionized water or soft water

    Working Method

    Continuous

    Enviroment Temperature (℃)

    0~40

    Outline Dimensions - L*W*H (mm)

    1200*750*1155 1300*850*1350

    Gross Weight (kg)

    245 280

    Ventilation Space Requirement (mm)

    400 in each direction


    The hydrogen generator consists of electrolysis cells, pure water tanks, hydrogen/water separators, collectors, dryers, sensors, pressure regulators, and switching power supplies. Only pure water can produce hydrogen. After the electricity is turned on, the cathode of the electrolytic cell produces hydrogen, the anode produces oxygen, and the hydrogen enters the hydrogen/water separator. Oxygen is released into the atmosphere. A hydrogen/water separator separates hydrogen from water. After the hydrogen enters into the desiccator and is dehumidified, it is adjusted to the rated pressure (adjustable from 0.02 to 0.45 MPa) through the pressure-regulating valve and regulating valve and output from the outlet. The pressure of hydrogen production in the electrolysis cell is controlled by the sensor at about 0.45 Mpa. When the pressure reaches the set value, the power supply to the electrolysis cell is cut off; when the pressure drops below the set value, the power supply resumes power supply.


    Hot Tags: dedicated to oxy-hydrogen kit machine, China, manufacturers, buy, discount, quotation, in stock