HHO Carbon Steel Cutting Machine Flame Cutting

HHO Carbon Steel cutting machine flame cutting SPECIFICATION Hydrogen and oxygen produced by using Gaintop oxyhydrogen cutting machine can replace acetylene, propane gas, gold flame gas, Teli gas, liquefied gas, natural gas and other industrial gases. It can be applied to manual cutting,...
  • HHO Carbon Steel cutting machine flame cutting

    SPECIFICATION

    Mode

    Specification

    GTHO-10000

    Input  Voltage

    380  ±10%,50/60Hz,three phases

    Rated  Capacity (KVA)

    31

    Working  Gas Pressure (Mpa)

    ≤0.2

    Relative Humidity (%)

    90

    Rated  Gas Production (L/h)

    10000    ±10%

    Water Consumption (L/h)

    5.8

    Maximum  Cutting Thickness (mm)

    300

    Effective Punching Thickness (mm)

    90

    Water  Feed

    auto

    Cooling  Mode

    Air  Cool

    The  Insulation Level

    F

    Power  Supply Protection Grade

    IP21S

    Flame  Temperature (℃)

    Adjustable  800~3200

    Working Medium

    Filtered  water or deionized water or soft water

    Working Method

    Continuous

    Enviroment  Temperature (℃)

    0~40

    Outline Dimensions - L*W*H (mm)

    1500*930*1940

    Gross  Weight (kg)

    610

    Ventilation Space Requirement (mm)

    400  in each direction 


    客户访问.gif


    Hydrogen and oxygen produced by using Gaintop oxyhydrogen cutting machine can replace acetylene, propane gas, gold flame gas, Teli gas, liquefied gas, natural gas and other industrial gases. It can be applied to manual cutting, semi-automatic linear cutting, profiling cutting, and numerical control cutting. The existing cutting machine can be used to cut carbon steel, cast steel and continuous casting steel, and has advantages comparable to other fuel gas. 


    切割.jpg


    Specifically, The advantages of the oxyhydrogen cutting machine are as follows:

    1) Hydrogen and oxygen energy is a clean energy source. No waste gas is produced during the manufacturing and use. Conducive to environmental protection and human health.

    2) The oxyhydrogen flame is concentrated and there is no heat radiation, and workers are protected from thermal fatigue. When the steel plate is cut, the surface is smooth and free of slag.

    3) Hydrogen and oxygen flame temperature is as high as 2800 degrees and the fire power is concentrated. Therefore, when cutting, the preheating time is equivalent to acetylene, which is faster than other gas preheating time.

    4) Hydrogen energy is ready for use, on-demand production, low-pressure gas supply, no storage, and at the same time, the oxyhydrogen machine has multiple safety protection devices. Therefore, it is safer to use than gas cylinders.

    5) The production of hydrogen energy requires only water and electricity, and it can work 24 hours in a row. As long as there is electricity in the water, there will always be a gas supply. When the gas cylinder is used up, it needs to be replaced frequently. Therefore, the time for replacing the gas cylinder can be saved and the working efficiency can be improved.

    6) Hydrogen and oxygen cuts do not need to mix combustion-supporting oxygen. Therefore, it is not necessary to adjust the proportion of oxygen gas and it is more convenient to use.

    7) Hydrogen Oxygen Cutting Compared with other fuel gases, it can save mixed oxygen and save 20% oxygen. Compared with acetylene, it can save more than 50% of gas cost. Compared with propane, it saves more than 30% of the cost.


    切割案例_06.png

    Hot Tags: HHO carbon steel cutting machine flame cutting, China, manufacturers, buy, discount, quotation, in stock