Brown Gas Carbon Steel Cutting Machine

Brown gas carbon steel cutting machine SPECIFICATION Crown Extension Hydrogen Oxygen Removal Machine Effect: (A) equipment function: 1. Eradicate the carbon deposition on the top of the chamber of the incinerator 2. Eliminating carbon deposition from oxygen sensors 3, eradicate the three-way...
  • Brown gas carbon steel cutting machine

    SPECIFICATION

    Mode

    Specification

    GTHO-300

    Input Voltage

    110/220v ±10%,50/60Hz, Single phase

    Rated Capacity (KVA)

    1.95

    Working Gas Pressure (Mpa)

    ≤0.09

    Relative Humidity (%)

    90

    Rated Gas Production (L/h)

    300 ±10%

    Water Consumption (L/h)

    0.16

    Water Feed

    auto

    Cooling Mode

    Air Cool

    The Insulation Level

    F

    Power Supply Protection Grade

    IP21S

    Flame Temperature (℃)

    Adjustable 800~3200

    Working Medium

    Filtered water or deionized water or soft water

    Working Method

    Continuous

    Enviroment Temperature (℃)

    0~40

    Outline Dimensions - L*W*H (mm)

    628*477*685

    Gross Weight (kg)

    72

    Ventilation Space Requirement (mm)

    400 in each direction



    Crown Extension Hydrogen Oxygen Removal Machine Effect:

    (A) equipment function:

    1. Eradicate the carbon deposition on the top of the chamber of the incinerator

    2. Eliminating carbon deposition from oxygen sensors

    3, eradicate the three-way catalyst carbon deposition

     

    (B) Equipment Effects:

    1, extended initiator overhaul moment

    2. Extended oxygen sensor life span

    3. Extend the life of three-way catalytic converters

    4, progress power 15-35%

    5, save fuel 5-20%

    6, reduce exhaust gas emissions 72%2. Regularly check the looseness or leakage of the pipe joints inside the machine.


    Method: Simply turn off the gas valve of the gas equipment or directly block the outlet pressure gauge of the rear panel to the overpressure setting value, which is generally (0.19Mpa), and whether it will fall after 5 minutes. If yes, then the machine has a leak; if not, the machine is in good condition and leaks must be re-tightened.

    3, often use dry compressed air to clean the power supply and the whole machine.

    4. Regularly check the on-off state of the electromagnetic valve in the machine, that is, whether the water-adding electromagnetic valve has normal magnetic attraction when the water indicator is on.


    Hot Tags: brown gas carbon steel cutting machine, China, manufacturers, buy, discount, quotation, in stock